TANDEMBOX Collection TANDEMBOX SERVO-DRIVE Power SupplyThis is the power supply that operates the SERVO-DRIVE system and is required for full functionality. SERVO-DRIVE is the new opening feature for TANDEM and TANDEMBOX drawers. By combining this feature with the silent and effortless closing action of BLUMOTION, perfecting motion has been taken to a new level.Features:UL certifiedCan power up to 20 drive units6 of cableConnect to switched GFCI outlet3-pronged power cord required (sold separately) Specifications: 85% efficiency typical3000 VAC input to output, 2000 VAC input to ground60 kHz +/- 10kHzInput100 - 240 VAC50 - 60 Hz2 A currentClass I Protection1.5mA max Earth Leakage currentPower factor: compliant with EN61000-3-2Output2 4 VDC100 W power maxOver voltage protection at 33... Less

Makita GA5010Z Specifications: Grinding Wheel: 5" Wire Cup Brush: 3-1/2" Sanding Disc: 5" No Load RPM: 11 000 AMPS: 10.5 Spindle Thread (11 UNC): 5/8" Overall Length: 14" Makita GA5010Z Includes: Grinder 5" Grinding Wheel (741407-8) Side Handle (153504-2) Wheel Guard (125268-8) Inner Flange (224399-1) Lock Nut (224658-4) Lock Nut Wrench (782424-9) Makita GA5010Z Features: 10.5 AMP Motor and Labyrinth Construction for the Toughest Applications Powerful 10.5 AMP motor delivers more output for increased performance Gear housing rotates 90degrees for operator convenience Refined Design at only 4.8 lbs. AC/DC switch for use with alternative power source Labyrinth construction seals the motor from dust and... Less

SKF ***NIB***BEARINGS 5210 A-2Z/C3 O/S DIAMETER APPROX: 3 1/2"I/S DIAMETER APPROX: 2"THICKNESS APPROX: 1 1/8"MADE IN: USA *PLEASE VIEW PICTURES CAREFULLY - SOLD AS IS** ***OLD STOCK*** PLEASE READ BEFORE BIDDING, MAKING AN OFFER,OR PURCHASING Please note this item is "AS IS" with NO WARRANTY OR GUARANTEE STATED NOR IMPLIED. Please DO NOT PAY until invoiced. WE COULD POSSIBLY SAVE YOU MONEY ON SHIPPING. All shipping/handling costs will be the sole responsibility of the buyer. ATTENTION INTERNATI

WE ARE SELLING A TIMING PULLY -108653 -108653 -Z56-P8 -LOCATION G1-3 THANKYOU - If you need to pay for item via credit card please contact us - MONDAY - FRIDAY 8am - 5pm - All items are described to the best of our knowledge. - We do not have the capabilities to test all equipment. - All items are sold as is without warranty unless specifically stated in the posting. This does not mean that the unit doesnt work, only that we have not tested or checked it out. This may also mean that we are n

Hydraulic Cylinder, Double Acting Tie Rod, Bore Dia 4 In, Stroke 12 In, Rod Dia 1 3/4 In, Retract 21 5/8 In., Npt Port 3/4 In, Max Pressure 2500 Psi, Temp Range 20 To 160, Urethane Piston Material, Hard Chrome Plated Piston Rod, Cast Iron Ring Material, Steel Tubes, Durable, Non-metallic Wear Band, Single, Bi-directional Dynamic Rod Seal, Steel Material, High Strength Tie Rods, Pre-loaded Piston Seal, Pilot Bushing, Black Finish, Nfpa And Jic Standards, Includes Adjustable Cushions

The cost-effective and competitive pricing of the new Miller TurboLite Personal Fall Limiters will make shock-absorbing lanyards obsolete on the jobsite. With the compact and lightweight TurboLite PFL, workers will no longer need to “switch-out” equipment to maintain a safe fall distance. Miller TurboLite PFL features include: First affordable alternative to shock-absorbing lanyardsExtremely compact and lightweight (1.9 lbs. [.86 kg]) provides 6-ft. (1.8 m) working capacity lifeline; unit attaches directly to the harness back D-ring for greater mobility and versatilityEngine ered webbing for greater abrasion resistance and long service life High-strength, impact-resistant nylon housing for maximum durabilityBuilt- in swivel prevents lifeline from twistingRated for up to a 400 lb. userNo... Less

Our G0510Z has plenty of power with its 3/4 HP motor. Its surface ground cast iron table is both durable & slippery smooth, while the cast iron fence with wood facing allows for easy & precise adjustments. But, best of all, this is a real shaper with a 1/2" spindle & it accepts 1/4" & 1/2" router bits. Equipped with a spindle lock & reversing switch just like the big boys. Put away your router & start shaping today! Features: Independently Adjustable Fence Push button ON/OFF Switch Pre-formed Steel Stand Shielded & Permanently Lubricated Spindle Bearings Split Cast Iron Fence Assembly with Wood Faces for Offset Profile Shaping Reversing switch Specifications: Motor Size: 3/4 HP, 110V, 10 AMP Spindle Diameter: 1/2" Spindle Length: 3" Spindle Travel: 7/8" Spindle Capacity Under Nut: 2-3/8"... Less

Hydraulic Cylinder, Double Acting Tie Rod, Bore Dia 2 In, Stroke 2 In, Rod Dia 1 In, Retract 9 1/8 In., Npt Port 1/2 In, Max Pressure 2500 Psi, Temp Range 20 To 160, Urethane Piston Material, Case Hardened And Hard Chrome Plated Piston Rod, Cast Iron Ring Material, Steel Tubes, Durable, Non-metallic Wear Band, Single, Bi-directional Dynamic Rod Seal, Steel Material, High Strength Tie Rods, Pre-loaded Piston Seal, Pilot Bushing, Black Finish, Nfpa And Jic Standards

The cost-effective and competitive pricing of the new Miller TurboLite Personal Fall Limiters will make shock-absorbing lanyards obsolete on the jobsite. With the compact and lightweight TurboLite PFL, workers will no longer need to “switch-out” equipment to maintain a safe fall distance. Miller TurboLite PFL features include: First affordable alternative to shock-absorbing lanyardsExtremely compact and lightweight (1.9 lbs. [.86 kg]) provides 6-ft. (1.8 m) working capacity lifeline; unit attaches directly to the harness back D-ring for greater mobility and versatilityEngine ered webbing for greater abrasion resistance and long service life High-strength, impact-resistant nylon housing for maximum durabilityBuilt- in swivel prevents lifeline from twistingRated for up to a 400 lb. userNo... Less

The SkatePlateH20 is our standard SkatePlate with the added benefit of a water jet system. This greatly reduces dust & debris, and as such is the perfect solution for tile, granite, masonry, concrete, or any like task. A button that attaches just above the saw trigger activates a High Pressure, Low Volume flow of water as needed. Take your thumb off the button and the flow stops. The stream of water shoots across the blade in such a manner as to not only keep things cool, lubricated, and dustless; it also helps prevent slurry from building up in the saw housing making for an easier clean up. Also, as the spray nozzle is aimed facing the blade, water will not pool up in front of the saw erasing any markings you may have made. The SkatePlate will not interfere with the depth of your cut... Less