ASSY, SHUTTLE, HI LOAD

Shuttle, Automatic Pass Through, Length 7 In., Width 6 In., Depth 3 In., Anchorage 5000 Lb., Material Stainless Steel, Silicone Moulding, D-ring Material Stainless Steel, Silicone Moulding, Requires Xenon (r) Horizontal Lifeline System, Full Body Harness, Shock Absorbing Lanyard, Attaches Xenon (r) Horizontal Lifeline Cable Systems

Ingersoll-Rand Oil, Filters Start Up Kit, For SS5L5, 20100251 Ingersoll Rand offers All Season Select start-up kits to provide improved protection. Each kit contains all the parts needed to correctly start up and maintain your compressor for the first year. The start-up kits provide everything you need for 2,000 hours of service between changes under normal operating conditions. Start-Up Kits Include (2) Quarts All Season Select lubricant, our synthetic, all-temperature blend designed to increase efficiency, reduce wear and prevent carbon build-up(2) Replacement air filter elements Compatible with the following Ingersoll Rand Air Compressors: SS5L5 14.25 L. 9.83 W. 9.38 H.

High Performance Cast Iron Air Compressor, Motor Running Power 3.0 Hp, Free Air Flow @ Maximum Pressure 10.3 Cfm, Free Air Flow @ 90 Psi 11.3 Cfm, Maximum Pressure 135 Psi, Phase Single, Voltage Rating 230 Volts, Current Rating 14.7 Amps, Tank Capacity 60 Gallons, Tank Type Vertical, Height 66 Inches, Length 20 Inches, Width 23 Inches, Npt Outlet (f) 1/2 Inches, 60 Hz

Tangless Helical Insert, Free Running, 304 Stainless Steel, Internal Thread Size 2-56, Unc Thread Type, Right Hand Thread Direction, Length 0.129", Free Coil Dia. 0.119", Tap Sizes 2-56, Drill Size #41, Tensile Strength (psi) 200,000, Rockwell Hardness C43-c50, Application For Metal, Package Quantity 100

98K2020T Features: -Self Priming: This pressure washer is able to independently pump water from most water sources (buckets, ponds, etc.) and does not require water to be pumped into if from a hose.-Has the option of Ground Fault Interrupter (GFI) which prevents shocks.-Pump design gives multi-hour bypass and run-dry capability preventing accidental pump damage and is freeze proof.-Dirt Killer turbo nozzle doubles cleaning efficiency.-Profes sional gun-jet lance.-Exit side chemical injection.-Gauge.- Safety coupler screw connections.-Knife -jet wash/soap nozzle.-Dirt Killer turbo nozzle.-2,000 PSI.-1.9 gallons per minute.-Cleaning power: 3,800.-Kranzle adjustable pressure unloader.-Steel frame with plastic cover capable of storing all accessories.-Inlet water filter. Specifications:... Less

Tangless Helical Insert, Screw Locking, 304 Stainless Steel, Internal Thread Size 2-56, Unc Thread Type, Right Hand Thread Direction, Length 0.129", Free Coil Dia. 0.119", Tap Sizes 2-56, Drill Size #41, Tensile Strength (psi) 200,000, Rockwell Hardness C43-c50, Application For Metal, Package Quantity 100

Designed for the professional, our 3 HP and 5 HP single stage compressors are ideal for almost anyone, from individuals that thrive on do-it-yourself projects to the professional air compressor user. When performance is defined by maximum operating pressure, increased air flow and extended duty cycles, Ingersoll Rand is the product of choice. You will get a compressor that features maximum air power, reliable precision engineered components and a durable design that is built to last. Legendary PerformanceIngers oll Rand, the worlds leader in air compressor manufacturing, is proud to bring industrial quality to the commercial and contractor trades.Designed for the professional, our 3-5 hp single-stage compressors are ideal for almost anyone, from individuals that thrive on do-it-yourself... Less

Adapter Kit, Light, Material Of Construction Stainless Steel, Length 21 In., Width 1-1/2 In., Height 3/16 In., Includes 6 Bracket, 6 Standoff Spacers, 6 Screws, 3 Flat Washers

Linear Bearing Quick Shaft, Shaft Dia 1.500 In, Dia Tolerance Min 1.499 In, Dia Tolerance Max 1.499 In, Length 60 In, 440c Stainless Steel Material, Minimum Surface Hardness 50 Rc, For Use With Thomson Linear Ball Bushing Bearings

Linear Bearing Quick Shaft, Shaft Dia 1.500 In, Dia Tolerance Min 1.499 In, Dia Tolerance Max 1.499 In, Length 42 In, 440c Stainless Steel Material, Minimum Surface Hardness 50 Rc, For Use With Thomson Linear Ball Bushing Bearings

Linear Bearing Quick Shaft, 60 Case, Shaft Dia 0.750 In, Dia Tolerance Min 0.7490, Dia Tolerance Max 0.7495, Length 36 In, Stainless Steel Material, Minimum Surface Hardness 50 Rockwell C, For Use With Thomson Linear Bearings

Linear Bearing Quick Shaft, 60 Case, Shaft Dia 0.625 In, Dia Tolerance Min 0.6240, Dia Tolerance Max 0.6245, Length 48 In, Stainless Steel Material, Minimum Surface Hardness 50 Rockwell C, For Use With Thomson Linear Bearings

Linear Bearing Quick Shaft, 60 Case, Shaft Dia 0.500 In, Dia Tolerance Min 0.4990, Dia Tolerance Max 0.4995, Length 48 In, Stainless Steel Material, Minimum Surface Hardness 50 Rockwell C, For Use With Thomson Linear Bearings

Linear Bearing Quick Shaft, Shaft Dia 1.500 In, Dia Tolerance Min 1.499 In, Dia Tolerance Max 1.499 In, Length 36 In, 440c Stainless Steel Material, Minimum Surface Hardness 50 Rc, For Use With Thomson Linear Ball Bushing Bearings

98K2017 Features: -Gauge.-Self Priming: This pressure washer is able to independently pump water from most water sources (buckets, ponds, etc.) and does not require water to be pumped into if from a hose.-Pump design gives multi-hour bypass and run-dry capability preventing accidental pump damage and is freeze proof.-Dirt Killer nozzle doubles cleaning efficiency.-Ground fault interrupter (GFI) prevents shocks.-Profession al gun-jet lance.-Exit side chemical injection.-Safety coupler screw connections.-Knife -jet (high-pressure wash/soap) nozzle.-Dirt Killer turbo nozzle.-1,600 PSI.-1.7 gallons per minute.-Cleaning power: 2,805.-Kranzle adjustable pressure unloader.-Steel frame with plastic cover that stores all accessories.-Inlet water filter. Specifications: -110 volt, 15 amps, TEFC... Less

Linear Bearing Quick Shaft, 60 Case, Shaft Dia 0.625 In, Dia Tolerance Min 0.6240, Dia Tolerance Max 0.6245, Length 36 In, Stainless Steel Material, Minimum Surface Hardness 50 Rockwell C, For Use With Thomson Linear Bearings

Linear Bearing Quick Shaft, 60 Case, Shaft Dia 0.375 In, Dia Tolerance Min 0.3740, Dia Tolerance Max 0.3745, Length 48 In, Stainless Steel Material, Minimum Surface Hardness 50 Rockwell C, For Use With Thomson Linear Bearings

98K2017T Features: -Self Priming: This pressure washer is able to independently pump water from most water sources (buckets, ponds, etc.) and does not require water to be pumped into if from a hose.-Pump design gives multi-hour bypass and run-dry capability preventing accidental pump damage and is freeze-proof.-Dirt Killer nozzle doubles cleaning efficiency.-Ground fault interrupter (GFI) prevents shocks.-Profession al gun-jet lance.-Exit side chemical injector.-Gauge.-S afety coupler screw connections.-Knife -jet (high pressure wash/soap) nozzle.-Dirt Killer turbo nozzle.-1,650 PSI.-1.7 gallons per minute.-Cleaning power: 2,805.-Kranzle adjustable pressure unloader.-Steel frame with plastic that stores all accessories.-Inlet water filter. Specifications: -110 volt, 15 amps, TEFC... Less

Tangless Helical Insert, Free Running, 304 Stainless Steel, Internal Thread Size 2-56, Unc Thread Type, Right Hand Thread Direction, Length 0.086", Free Coil Dia. 0.119", Tap Sizes 2-56, Drill Size #41, Tensile Strength (psi) 200,000, Rockwell Hardness C43-c50, Application For Metal, Package Quantity 100

Tangless Helical Insert, Screw Locking, 304 Stainless Steel, Internal Thread Size 2-56, Unc Thread Type, Right Hand Thread Direction, Length 0.172", Free Coil Dia. 0.119", Tap Sizes 2-56, Drill Size #41, Tensile Strength (psi) 200,000, Rockwell Hardness C43-c50, Application For Metal, Package Quantity 100

Tangless Helical Insert, Free Running, 304 Stainless Steel, Internal Thread Size 2-56, Unc Thread Type, Right Hand Thread Direction, Length 0.172", Free Coil Dia. 0.119", Tap Sizes 2-56, Drill Size #41, Tensile Strength (psi) 200,000, Rockwell Hardness C43-c50, Application For Metal, Package Quantity 100

Tangless Helical Insert, Screw Locking, 304 Stainless Steel, Internal Thread Size 2-56, Unc Thread Type, Right Hand Thread Direction, Length 0.086", Free Coil Dia. 0.119", Tap Sizes 2-56, Drill Size #41, Tensile Strength (psi) 200,000, Rockwell Hardness C43-c50, Application For Metal, Package Quantity 100

98K2020 GFI: K 2000 with GFI Features: -Self Priming: This pressure washer is able to independently pump water from most water sources (buckets, ponds, etc.) and does not require water to be pumped into if from a hose.-Has the option of Ground Fault Interrupter (GFI) which prevents shocks.-Pump design gives multi-hour bypass and run-dry capability preventing accidental pump damage and is freeze proof.-Dirt Killer turbo nozzle doubles cleaning efficiency.-Profes sional gun-jet lance.-Exit side chemical injection.-Gauge.- Safety coupler screw connections.-Knife -jet wash/soap nozzle.-Dirt Killer turbo nozzle.-2,000 PSI.-1.9 gallons per minute.-Cleaning power: 3,800.-Kranzle adjustable pressure unloader.-Steel frame with plastic cover capable of storing all accessories.-Inlet water filter... Less

Helical Insert, Screw Locking, 304 Stainless Steel, Internal Thread Size 2-56, Unc Thread Type, Right Hand Thread Direction, Length 0.129", Free Coil Dia. 0.119", Tap Sizes 2-56, Drill Size #41, Tensile Strength (psi) 200,000, Rockwell Hardness C43-c50, Application For Metal, Package Quantity 10

Helical Insert, Free Running, 304 Stainless Steel, Internal Thread Size 2-56, Unc Thread Type, Right Hand Thread Direction, Length 0.086", Free Coil Dia. 0.119", Tap Sizes 2-56, Drill Size #41, Tensile Strength (psi) 200,000, Rockwell Hardness C43-c50, Application For Metal, Package Quantity 10

Eyebolt, Without Shoulder, Stainless Steel, Finish Plain, Thread Size 3/4-10, Thread Length 4 In, Shank Dia 3/4 In, Shank Length 12 In, Eye Inside Dia 1 1/2 In, Eye Outside Dia 2 13/16 In, Working Load Limit 5200 Lb, Includes Nut, Overall Length 14.80 In

Electric Single Stage Air Compressor, Motor Running Power 5.0 Hp, Free Air Flow @ Maximum Pressure 16.1 Cfm, Free Air Flow @ 90 Psi 18.0 Cfm, Maximum Pressure 135 Psi, Phase Single, Voltage Rating 230 Volts, Current Rating 21.5 Amps, Tank Capacity 60 Gallons, Tank Type Vertical, Height 71 Inches, Length 20 Inches, Width 30 Inches, Npt Outlet (f) 1/2 Inch, 60 Hz

Tool Wrap, Type 309 Ss, Soft Annealed, Length 100 Ft., Width 10 In, Thickness 0.002 In, Resists Chromium Carbide Precipitation During Exposure To High Temperature, Max. Temp. 2100 F, Function Helps Protect From Scale, And Oxide Buildup During Atmospheric Furnace Heat Treating, Protects Surface Of Air Hardening Tool Steels, Creates Airtight Envelope Around Part, Can Use In Furnaces Up To 2000 F

Tool Wrap, Type 321 Ss, Soft Annealed, Length 100 Ft., Width 10 In, Thickness 0.002 In, Resists Chromium Carbide Precipitation During Exposure To High Temperature, Max. Temp. 1800 F, Function Helps Protect From Scale, And Oxide Buildup During Atmospheric Furnace Heat Treating, Protects Surface Of Air Hardening Tool Steels, Creates Airtight Envelope Around Part, Can Use In Furnaces Up To 1800 F