SCSI-2 Cables from Cables To Go provide you with the performance you expect from your SCSI devices. These SCSI-2 cables feature the Micro-Density 50-pin connector found on Fast SCSI-2 host adapters and on many newer SCSI peripherals. With a Male-to-Male cable you can connect one peripheral directly to another or to a SCSI host adapter.Designed with a foil and braid shield overwrapping a twisted-pair construction providing maximum immunity to EMI/RFI interference combined with a 132 Ohm impedence wire appropriate for faster bus speeds associated with SCSI-2. Shielding of the cable is meticulously handled by soldering 360 degrees from the shielding of the wire to the metal shell which shields the connector. The squeeze latches which fasten the cable to the device are solid perfectly located... Less

SCSI-2 Cables from Cables To Go provide you with the performance you expect from your SCSI devices. These SCSI-2 cables feature the Micro-Density 50-pin connector found on Fast SCSI-2 host adapters and on many newer SCSI peripherals. With a Male-to-Male cable you can connect one peripheral directly to another or to a SCSI host adapter. Designed with a foil and braid shield overwrapping a twisted-pair construction providing maximum immunity to EMI/RFI interference combined with a 132 Ohm impedence wire appropriate for faster bus speeds associated with SCSI-2. Shielding of the cable is meticulously handled by soldering 360 degrees from the shielding of the wire to the metal shell which shields the connector. The squeeze latches which fasten the cable to the device are solid perfectly... Less

The Male-to-Male HD50 to HD50 Double Shielded SCSI Cable from Tripp Lite is designed to connect two SCSI II (fast SCSI) devices together. It is manufactured using double shielded 25 twisted pair high impedance cable. It incorporates low-capacitance, impedance matched, 28 AWG, stranded, tinned copper cable with insulated in polypropylene. It measures 6 ft in length.

SCSI-2 Cables from Cables To Go provide you with the performance you expect from your SCSI devices. These SCSI-2 cables feature the Micro-Density 50-pin connector found on Fast SCSI-2 host adapters and Centronics 50-pin connector found on many older peripherals. With a Male-to-Male cable you can connect one peripheral directly to another or to a SCSI host adapter. Designed with a foil and braid shield overwrapping a twisted-pair construction providing maximum immunity to EMI/RFI interference combined with a 132 Ohm impedence wire appropriate for faster bus speeds associated with SCSI-2. Shielding of the cable is meticulously handled by soldering 360 degrees from the shielding of the wire to the metal shell which shields the connector. The squeeze latches which fasten the cable to the... Less

SCSI-2 Cables from Cables To Go provide you with the performance you expect from your SCSI devices. These SCSI-2 cables feature the Micro-Density 50-pin connector found on Fast SCSI-2 host adapters and a DB25-pin connector found on many peripherals. With a Male-to-Male cable you can connect one peripheral directly to another or to a SCSI host adapter. Designed with a foil and braid shield overwrapping a twisted-pair construction providing maximum immunity to EMI/RFI interference combined with a 132 Ohm impedence wire appropriate for faster bus speeds associated with SCSI-2. Shielding of the cable is meticulously handled by soldering 360 degrees from the shielding of the wire to the metal shell which shields the connector. The squeeze latches which fasten the cable to the device are solid... Less

C6200-06 HD50 Male to HD50 Male External SCSI Cable / 6ft

SCSI-2 Cables from Cables To Go provide you with the performance you expect from your SCSI devices. These SCSI-2 cables feature the Micro-Density 50-pin connector found on Fast SCSI-2 host adapters and a DB25-pin connector found on many peripherals. With a Male-to-Male cable you can connect one peripheral directly to another or to a SCSI host adapter. Designed with a foil and braid shield overwrapping a twisted-pair construction providing maximum immunity to EMI/RFI interference combined with a 132 Ohm impedance wire appropriate for faster bus speeds associated with SCSI-2. Shielding of the cable is meticulously handled by soldering 360 degrees from the shielding of the wire to the metal shell which shields the connector. The squeeze latches which fasten the cable to the device are solid... Less

Ultra SCSI (or SCSI-3) is the latest of the ever improving SCSI standards and is the cable of choice for such peripherals as the Iomega Zip Drive. It includes specifications for a single-ended as well as a differential bus style. The single-ended is similar to Fast SCSI-2 except it accommodates addressing up to 32 devices over a 16 bit single cable bus. This new style also increases data through-put up to 20 Mbps in single-ended applications. Single-ended SCSI-3 is limited to 4 devices over 3 meters or 8 devices over 1.5 meters. Differential SCSI refers to a bus configuration using two wires per signal with the signal being derived by the voltage difference between the two wires. This approach effectively eliminates noise on the SCSI bus and allows bus length to increase up to 25 meters... Less

Ultra SCSI (or SCSI-3) is the latest of the ever improving SCSI standards and is the cable of choice for such peripherals as the Iomega Zip Drive. It includes specifications for a single-ended as well as a differential bus style. The single-ended is similar to Fast SCSI-2 except it accommodates addressing up to 32 devices over a 16 bit single cable bus. This new style also increases data through-put up to 20 Mbps in single-ended applications. Single-ended SCSI-3 is limited to 4 devices over 3 meters or 8 devices over 1.5 meters. Differential SCSI refers to a bus configuration using two wires per signal with the signal being derived by the voltage difference between the two wires. This approach effectively eliminates noise on the SCSI bus and allows bus length to increase up to 25 meters... Less

External C50M male to HD50M male SCSI Cable - 1 meter / 3 ft - Brand New

C6200-10 HD50 Male to HD50 Male External SCSI Cable / 10ft

This is a screw-type SCSI III cable with gold-plated connectors for superior data transfer.

With SCSI Adapters from Cables To Go you can save the time and expense of buying new cables by simply adapting your existing ones to interface with the connector types found on many of the newer model SCSI peripherals. We carry a wide variety of adapters to make the conversion between your older SCSI or fast SCSI cable and the new high density SCSI connectors seamless. With the external SCSI-2 to SCSI-1 adapter easily adapt an external SCSI-2 micro-density 50-pin connection to a SCSI-1 centronics 50-pin connection. Connectors: External SCSI-2 Micro-Density 50 Male with Latch Blocks to External SCSI-I Centronics 50-pin Female. Use: Connect a SCSI-1 Centronics 50-pin Male cable to a SCSI-2 Micro-Density 50-pin female port.

Ultra SCSI or SCSI-3 is the latest of the ever improving SCSI standards and is the cable of choice for such peripherals as the Iomega Zip Drive. It includes specifications for a single-ended as well as a differential bus style. The single-ended is similar to Fast SCSI-2 except it accommodates addressing up to 32 devices over a 16 bit single cable bus. This new style also increases data through-put up to 20 Mbps in single-ended applications. Single-ended SCSI-3 is limited to 4 devices over 3 meters or 8 devices over 1.5 meters. Differential SCSI refers to a bus configuration using two wires per signal with the signal being derived by the voltage difference between the two wires. This approach effectively eliminates noise on the SCSI bus and allows bus length to increase up to 25 meters. If... Less

SCSI-1 Cables from Cables To Go provide you with the performance you expect from your SCSI devices. These SCSI-1 cables feature the DB25-pin found on SCSI host adapters on PCs or Macs to a 50-pin Centronics connector most often found on peripherals. With the Male-to-Male cable you can connect one peripheral directly to your SCSI host card. Designed with a foil and braided shield overwrapping a twisted-pair construction providing maximum immunity to EMI/RFI interference combined with a high quality wire that provides data integrity. Molded connectors provide strain relief and add additional protection against EMI/RFI interference. Connectors: DB25-pin Male to Centronics 50-pin Male. Cable Type: SCSI-1. Primary Use: Connecting the DB25 SCSI port on a PC or Mac to an external SCSI-1 device... Less

Ultra SCSI or SCSI-3 is the latest of the ever improving SCSI standards and is the cable of choice for such peripherals as the Iomega Zip Drive. It includes specifications for a single-ended as well as a differential bus style. The single-ended is similar to Fast SCSI-2 except it accommodates addressing up to 32 devices over a 16 bit single cable bus. This new style also increases data through-put up to 20 Mbps in single-ended applications. Single-ended SCSI-3 is limited to 4 devices over 3 meters or 8 devices over 1.5 meters. Differential SCSI refers to a bus configuration using two wires per signal with the signal being derived by the voltage difference between the two wires. This approach effectively eliminates noise on the SCSI bus and allows bus length to increase up to 25 meters. If... Less

C6000-06 HD50 Male to C50 (Centronics) External SCSI Cable / 6ft

VHDCI (Very High-Density Cable Interconnect) SCSI Cables from Cables To Go feature 28AWG double-shielded twisted-pair cabling ferrites and.8mm 68-pin molded connectors to reduce EMI/RFI interference. These cables are designed to meet or exceed SCSI specifications. This cable is primarily used to connect advanced SCSI multiport applications to RAID controllers. All Cables To Go VHDCI cables are built with the offset connector so that they may be utilized in stacking environments. The small footprint allows up to four channels to be connected on a single card and offers excellent shielding against data loss. By creating this improved physical interconnect connectivity is both more versatile and manageable. VHDCI cables are also referred to as SCSI-V cables. Connectors: External Very... Less

C6000-10 HD50 Male to C50 (Centronics) External SCSI Cable / 10ft

CABLESUN - VHDCI 68 PIN MALE TO HDB50 PIN MALE 6FT SCSI CABLE TO ADD A SCSI DEVICE OR ENCLOSURE (MAD-6200-06). NEW. IN STOCK.

We offer a wide variety of SCSI Terminators to optimize the performance of your SCSI bus - from the popular passive and active terminators for single-ended SCSI applications to the active negation and hard-to-find premium-quality forced perfect terminators. Picking the right terminator is vital to the performance of your SCSI chain. A passive terminator is simply a resistor network designed to regulate the impedance in the line while an active terminator uses a voltage regulator to optimize signal voltage. Active termination is always preferred over passive and most Cables To Go Active Terminators feature an LED to monitor terminator power line status. Before you can connect your expensive SCSI equipment make sure you make the right connection with a Cables To Go Terminator! Connector:... Less

With SCSI Adapters from Cables To Go you can save the time and expense of buying new cables by simply adapting your existing ones to interface with the connector types found on many of the newer model SCSI peripherals. We carry a wide variety of adapters to make the conversion between your older SCSI or fast SCSI cable and the new high density SCSI connectors seamless. With the external SCSI-1 to SCSI-3 adapter easily adapt an external SCSI-1 centronics 50-pin connection to an external SCSI-3 micro-density 68-pin male connection. Connectors: External SCSI-1 Centronics 50-pin Female to External SCSI-3 Micro-Density 68-pin Male with ThumbscrewsUse: Converts a SCSI-1 Centronics 50-pin male connection to a SCSI-3 Micro-Density 68-pin male connection

Ultra SCSI (or SCSI-3) is the latest of the ever improving SCSI standards and is the cable of choice for such peripherals as the Iomega Zip Drive. It includes specifications for a single-ended as well as a differential bus style. The single-ended is similar to Fast SCSI-2 except it accommodates addressing up to 32 devices over a 16 bit single cable bus. This new style also increases data through-put up to 20 Mbps in single-ended applications. Single-ended SCSI-3 is limited to 4 devices over 3 meters or 8 devices over 1.5 meters. Differential SCSI refers to a bus configuration using two wires per signal with the signal being derived by the voltage difference between the two wires. This approach effectively eliminates noise on the SCSI bus and allows bus length to increase up to 25 meters... Less

With SCSI Adapters from Cables To Go you can save the time and expense of buying new cables by simply adapting your existing ones to interface with the connector types found on many of the newer model SCSI peripherals. We carry a wide variety of adapters to make the conversion between your older SCSI or fast SCSI cable and the new high density SCSI connectors seamless. With the external SCSI-2 to SCSI-3 adapter easily adapt an external SCSI-2 micro-density 50-pin connection to an external SCSI-3 micro-density 68-pin male connection. Connectors: External SCSI-2 Micro-Density 50-pin Female to External SCSI-3 Micro-Density 68-pin Male with Thumbscrews. Use: Converts a SCSI-2 Micro-Density 50-pin male connection to a SCSI-3 Micro-Density 68-pin male connection.

We offer a wide variety of SCSI Terminators to optimize the performance of your SCSI bus - from the popular passive and active terminators for single-ended SCSI applications to the active negation and hard-to-find premium-quality forced perfect terminators. Picking the right terminator is vital to the performance of your SCSI chain. A passive terminator is simply a resistor network designed to regulate the impedance in the line while an active terminator uses a voltage regulator to optimize signal voltage. Active termination is always preferred over passive and most Cables To Go Active Terminators feature an LED to monitor terminator power line status. Before you can connect your expensive SCSI equipment make sure you make the right connection with a Cables To Go Terminator! Connector:... Less

C7300-15 HD68 Male to C50 (Centronics) External SCSI Cable / 15ft

This is a screw-type SCSI III cable with gold-plated connectors for superior data transfer.

Multi-platform SCSI II external peripheral cable HD50M/M. This 6ft cable is designed to connect two SCSI II (fast SCSI) devices together. Manufactured using double shielded 25 twisted pair high impedance cable. Constructed with low-capacitance impedance matched 28 AWG stranded tinned copper cable with insulated in polypropylene. Tripp Lite warrants this product to be free from defects in materials and workmanship for life. SCSI II CABLE - HD-50 (M) / HD-50 (M) - 6 feet

Connects UltraSCSI VHDCen68 (68Pin .8mm VHDCI) to any Centronics50 SCSI. This premium cable is double shielded with 25 TwistedPairs wiring to support maximum speed. This SCSI cable has matched impedance, PVC jacket and molded ends with inner hood soldered 360 degrees to the connector for complete end to end shielding. (Connectors: VHDCen68 Male to Cen50 Male; Length: 6ft)

With SCSI Adapters from Cables To Go you can save the time and expense of buying new cables by simply adapting your existing ones to interface with the connector types found on many of the newer model SCSI peripherals. We carry a wide variety of adapters to make the conversion between your older SCSI or fast SCSI cable and the new high density SCSI connectors seamless. With the External SCSI-3 to SCSI-2 adapter easily adapt a SCSI-3 MD68-pin host connection to a SCSI-2 MD50-pin female connection. This adapter provides high-byte termination which is required for this type of connection. Connectors: External SCSI-3 Micro-Density 68-pin Male with Thumbscrews to External SCSI-2 Micro-Density 50-pin Female. Use: Converts a SCSI-3 MD68-pin female host connector to a SCSI-2 MD50-pin female... Less