60"L 8 Outlet Power Supply Includes 8 outlets, on/off switch, on indicator light, resettable circuit breaker, 6' cord. Mounts to electrical supply mounting rail which is fully adjustable on uprights or to worksurface. 15A, 125V

72"L 8 Outlet Power Supply Includes 8 outlets, on/off switch, on indicator light, resettable circuit breaker, 6' cord. Mounts to electrical supply mounting rail which is fully adjustable on uprights or to worksurface. 15A, 125V

Simplifies installations that do not require a conduit, Class 2 outputs standard and may be wired directly to 115VAC input Provides continuous regulated and filtered 12VDC or 24VDC (80-800) Designed specifically to support electric locks and access control systems Provides individual fused protection, field reset On/Off switch allows for easy service and inspection Fire alarm input provides release of fail-safe locks in case of emergency Field selectable outputs Auto-resetting circuit protection Battery charging circuit, PTC protection LED system status indicator Class 2 outputs Heavy gauge enclosure, 18 ga Low battery disconnect when batteries are below 70% capacity Painted Beige Finish

The SM1BOE Signal Control Power Supply is designed to convert one (1) alarm input into six (6) siren outputs and one (1) strobe output. The SM1BOE also provides resetable panic output power and aux. power for motion sensors or accessories. Specifications: Input 115VAC / 60 Hz, 1.8 amps. Six (6) speaker outputs. Common speaker driving circuit (keeps speakers in phase). Six (6) alarm silence switches. One (1) alarm strobe output (2 amps max.). Isolated Trigger input. AC and Battery Fail LED indication. Trigger and Emergency LED indicator on front panel. Isolated trouble LED input 12VDC to 24VDC. Exterior speaker circuit breaker protection (PTC). Strobe output circuit breaker protection (PTC). Resetable 12VDC Panic Output. 12VDC auxiliary power output (2 amps max.). Four (4)... Less

72"L 8 Outlet Power Supply Includes 8 outlets, on/off switch, on indicator light, resettable circuit breaker, 6' cord. Mounts to electrical supply mounting rail which is fully adjustable on uprights or to worksurface. 15A, 125V

Adic 3782201000 ATL L500 POWER SUPPLYProduct Details: Manufacturer: AdicItem Condition: New ItemPart Number: 3782201000Product Type: Technology Category: N/ASanworks SKU#: LIB01706890 Days Unlimited WarrantyExtended Warranty AvailableOne Year Product Support with Sanworks Included100% Satisfaction or Your Money BackIn StockGot specification or compatibility questions? Please do not hesitate to E-mail us. We have 24/7 live sales and services available after-hours as well. Data Storage Specialists are standing by to assist.

Model SMP10 power supply converts low voltage AC input, to a 12VDC or 24VDC @ 10 amp of continuous supply current output. Dimensions (approximate): 7 x 4.25"W x 2.3"H Features 12VDC or 24VDC selectable output 10 amp continuous supply current Transformer requirements: - 28VAC/175VA for 12VDC @ 10 amp output (Altronix Model # T28140) - 28VAC/175VA for 24VDC @ 6 amp output (Altronix Model # T28140) - 28VAC/300VA for 24VDC @ 10 amp output (Altronix Model # T28300) Filtered and electronically regulated outputs Short circuit and thermal overload protection Built-in charger for sealed lead acid or gel type battery backup Maximum charge current .7 amp Zero voltage drop upon transfer to battery backup AC input and DC output LED... Less

Field Selectable Voltage 12VDC-5AMP or 24VDC-3AMP Filtered and Regulated DC Output Jumper Selectable Auto or Manual Reset (PDD-FT model only) Short Circuit Protection Low Battery Monitor and AC Fail Output Relay Modular Options Built-in Electrical Outlet (110 VAC) Auto Sensing AC Input (90-250 VAC) Fire Panel Interface with Switching Output Drop Down Lid Can be Used for a Work Surface "End of Line??? Resistor Supervision on Fire Interface Selectable Ground Fault Detection on Fire Interface Multi Panel Interconnect- Fire Disconnect External AC Power Indicator OPTIONS & ACCESSORIES Power Supply c/w Power Distribution Device-Fire Trigger 1-Output Power Distribution Device 8-Output Power Distribution Modules 4 & 8-Output (Fused or PTC-Auto Reset Breaker) ... Less

This long-life Battery Pak and Charger now has infinitely high-low control. Pulse width modulation extends battery life up to 10 hours in low setting yet gives a full 2.5 hours on high. Can be used on a vehicle battery with an optional connector. Built-in charger allows you to fully recharge the battery in 12 hours. Purge the area on high for 10 minutes, reduce to low speed (low-noise as well) and maintain fresh air for the whole work shift. Ideal for construction job sites to eliminate noisy gasoline-engine blowers. High-low control enables fast-purge ventilation and lower speed for maintaining safe work space. High impact case includes battery and built-in charger for overnight charging. Up to 10 hours of continuous operation. Lightweight and portable. 17.00 L. 15.00 W. 11.00 H.

The HP Procurve 620 Is An Ac Powered 1u Package That Connects To A Network Switch Through Cables To Provide The Switch With One Or More Of The Following: Redundant 12v Power For The Network Switch Circuitry, Redundant Poe Power For Poe Devices Connected To A Poe Network Switch, Extended Poe Power For Poe Devices Connected To A Poe Network Switch. The HP Procurve 620 Utilizes Three Internal Power Supplies, And If Any One Of Them Fails, The Unit Will Continue To Report Its Status To All Connected Switches. It Will Continue To Provide Support To The Extent Possible With The Power That Remains Available.

HP - 500 WATT POWER SUPPLY FOR PROLIANT DL320 G6 DL160 G6 DL165 G6 (506077-001). . IN STOCK.

Power Supply Cord, Speciality Type, Length 8 Ft., Bare Connector End, Sjo Cord Type, 14/3 Gauge / Conductor, Black Rubber Jacket, 15 Amps Max. Load, Nema Plug Configuration 6-15p, Nominal Outside Dia. 0.375 In., Temp. Range 32 To 194 Degrees F, Voltage Rating 250

UL listed for access control. Fire alarm interface module. Fire alarm reset switch and AC power indicator accessible on front cover. Automatic reset circuit protection. 1.75 amp continuous supply current at 12 or 24 VDC, field selectable. Filtered, electronically regulated output. Built-in battery charger (batteries optional). Includes power supply, enclosure, cam lock and transformer. Life Safety Code Requirement.

Dual Fan Power supply Switch ATX 420W Retail box It supports both the 20-pin and 24-pin ATX v.2.2 motherboards and includes two PCI Express 6-pin connectors, which can supply power to two advanced graphics cards running in SLI or.

225075-001 HP 500W Hot Plug RPS Redundant Power Supply for Proliant ML570 G2 & G3. Technician tested clean pulls w/ 30 day warranty. We carry stock.