Tempo SATA E4i Host Adapter Card - 1 SATA Data Cable - Quick Start Guide - Software CD - Sonnet 1 Year Limited Warranty.Do your storage needs outweigh what your new dual-core Power Mac G5 can support? Stuff it - with drives, that is! Sonnet's Tempo SATA E4i 4-port Serial ATA Host Controller for PCI Express enables you to connect up to 4 additional internal drives for the perfect balance of flexible expandability and superior performance.This card is an ideal companion to G5 Jive internal drive mount system for Power Mac G5 computers - along with your SATA drives, this combination is the most cost effective way for adding up to 4 Terabytes of high-performance capacity to your G5. Do you need more speed? Tempo SATA E4i offers 3Gb/s per port data transfer support and gives you performance to... Less

Silicone Image Sil3124 Serial ATA I / II to PCI-Express Host Controller Card Compliant with PCI-X Specification Revision 1.0a Fully Plug and Play Integrated serial ATA link and PHY logic Compliant with Serial ATA 1.0 and Serial ATA II Extensions to Serial ATA 1.0 Specifications Supports Serial ATA Generation2 transfer rate of 3.0 Gb/s Supports Serial ATA II Port Multiplier 1.0 specifications Backward compatible to SATA 1.0 specification Supports 4 independent Serial ATA channels RAID 0, 1, 5, 10 JBOD function supported Adjustable Stripe size for RAID 0 Supports Co-Exist RAID set and Non-RAID H.D.D Allow H.D.D.s with different sizes to be configurated in a RAID set Package Includes SATA2 Controller Card CD Driver User Manual 2 SATA Serial ATA Cable Support DOS, Windows 98, 98 SE, NT4.0,... Less

Upgrade and expand your system's connectivity with this PCI to SATA / eSATA card PCI 2-Channel Serial-ATA Controller Card, 1x Internal SATA and 1x External e-SATA, SIL3512 Chipset Silicon Image SIL3112A Serial ATA (SATA) host controller chipset 1x Internal SATA Port and 1x External e-SATA Port PCI 32-Bit 33/66 MHz Interface Compliant with PCI Specification Revision 2.3 Support PCI Bus-Master Access Fully Plug & Play Compliant with Serial ATA Specification Revision 1.0 Support Serial ATA Generation 1 transfer rate of 1.5Gb/s (150MB/s) Support two independent Serial ATA channels Independent 256-byte FIFOs per Serial ATA channel for host reads and writes Package dimensions: 7 x 5.5 x 1.5 inch Includes: PCI SATA controller card CD driver User manual Brand: SYBA Model: SD-SATA-1E1I UPC:... Less

Compliant with PCI Express Specification Revision 1.0a. 1-Lane (x1) PCI Express with transfer rate 2.5 Gb/s Full Duplex channel. Fully Plug & Play compatible. Supports Raid function 0 1 5 10. SATA II Interface. Integrated Serial ATA Link and PHY logic. Compliant with Serial ATA 1.0 and Serial ATA II Extensions to Serial ATA 1.0 Specifications. Supports Serial ATA Generation 2 transfer rate of 3.0 Gb/s. Supports Serial ATA II: Port Multiplier 1.0 Specifications. Backward compatible to SATA 1.0 Specification. Supports four independent Serial ATA channels. Independent Link Transport and data FIFO. Independent command fetch scatter/gather and command execution. Supports Legacy Command Queuing (LCQ). Supports Native Command Queuing (NCQ). Supports Non-zero offsets (NCQ). Supports out of order... Less

The PEXESAT32 2 Port PCI Express 6Gbps eSATA Controller Card offers simple connectivity between a host computer and eSATA 3.0 devices - a cost-effective solution for connecting high-speed storage such as High RPM Hard Drives and Solid State Drives (SSD) which in turn allows for easier data backups and archiving. With full support for SATA 3.0 hard drives and data transfer speeds of up to 6 Gbps the adapter card features a native PCI Express single chipset that provides enhanced compatibility reliability and performance for external SATA 600 MB/s storage needs. The controller card is backward compatible with SATA 2.0 devices providing the versatility to use older storage and features support for RAID 0 and 1 modes as well as port multiplier capability with command-based and FIS-based... Less

PCI-Express (PCIe) x1 board with two SATA 6 Gb/s and one Parallel ATA channels. Installs in any available PCIe slot. Dual Profile design to install in standard height and low profile chassis with included brackets. Connect up to 2 Serial ATA and 2 PATA (or mix) hard disk drives. Compliant with PCI Express 2.0 specifications. Compliant with Serial ATA specification revision 3.0. Supports Serial ATA NCQ Streaming and Queue Management Command. Supports AHCI 1.0 and IDE programming interface. Supports ATA/ATAPI-7 specification and ATA and ATAPI commands. Chipset: Marvell 88SE9128. Supports RAID 0 & RAID 1 (SATA hard disk drives only). Dimensions: 3.25 L x 0.75 W x 4.75 H.

Design in Japan. 1 Ultra ATA133 Port. 2 SATA Ports. Chipset: VIA VT6421A. SATA RAID 0 1 0+1 JBOD Supported. PCI 32-bit 33MHz interface. Compliant with PCI specification 2.2. Support PCI Bus-Master access. Fully Plug & Play compatible. Totally software transparent with PATA & SATA. Parallel ATA interface. Support Ultra DMA Mode Transfer up to Mode 6 Timing. Transfer Rate up to 133MB/s. 48-bit LBA Mode for Connecting HDD More Than 137GByte. Support PIO Mode 4 2 1. Support up to 2-PATA Hard Disk. Support Serial ATA 1.0 Specification. Support up to 2-SATA Hard Disk. RAID 0 1 0+1 JBOD Support. Support Windows98SE/ME/20 00/XP/2003 Server/XP 64-bit Linux

Easily add Serial ATA II (3.0Gbps) connectivity to your desktop computer. Supports a 1-lane (x1) 2.5Gbps PCI Express bus one way. Standard height and low profile brackets are included to work in different chassis form factors. Two internal Serial ATA generation II ports with transfer rates of 3.0Gbps (300MBps). RoHS compliant. Type: Retail. Ports: 7-pin 2 x Serial ATA Male Serial ATA/300 Serial ATA (7-pin) Internal. Form Factor: Low-profile Internal. Regulatory approval(s): FCC Class B (DoC) & CE. Chipset: Silicon Image. Compliant with PCI Express Base Specification Revision 1.0a. Compliant with Serial ATA 1.0a specification with support for full complement of SATA II optional features. Installs in any available PCI Express slot and supports data transfer rates up to 3.0Gbps (300MBps)... Less

Silicon Image Sil3114 SATA controller chip. Compliant with PCI Specification Rev. 2.3 32bit 33/66Mhz. Compliant with Serial ATA 1.0 Specification. Provides 4 independent channels to support up to 4 Serial ATA devices. Supports RAID 0 1 5 0+1 JBOD and Individual modes. Supports SATA up to 150MBps. Ports:. 4 x Internal SATAports. 2 x Enternal SATA (eSATA) ports. Dimensions: 102 x 120 x 18mm. OS Support: Windows 2000 XP/2003 32/64-bit Vista 32/64-bit. System Requirements:. Computer with an available PCI slot. Windows2000 XP 32/64-bit Vista 32/64-bit. Package Contents: 6-Port SATA II 150 PCI Host Card w/RAID User s Manual Driver CD 2 x SATA Data Cable.

FastTrak TX4650 - 4-port PCI Express x1 to SAS/SATA 3Gb/s RAID0/1/5/10 and JBOD Controller Card. The low-profile form factor FastTrak TX4650 controller offers a low-cost solution for implementing a RAID storage system with up to two high-performance SAS or SATA 3Gb/s disk drives spanning server workstation and desktop markets. Promise Controller Card Fasttrak Tx4650 Pci-E Sata/Sas 3gb/S 4 X Ports Raid 5 Package. Offers sustained data transfers up to 250MB/sec. 64-bit LBA support for logical drive above 2TB. Disk Activity LED Headers. RAID Levels - RAID 0/1/5/10 and JBOD Support.