Network Cables

Male

Patch panel. 12 Port. Category 5E. Exceeds TIA/EIA Cat 5E standards. Includes mounting screws. High speed data applications. 110 Type. Prenumbered ports. Vertical. Color: Black.

Advanced High Speed Ethernet cable maximum data transfer rate: 10 Gbps,500MHz bandwidth is more than twice the CAT 6 requirement,XLN technology rejects noise and interference

Tripp Lite P569 Series HDMI cables are the latest generation of Digital Video and Audio: HDMI High Speed with Ethernet. These cables offer the highest level of performance by HDMI: supports Ethernet Data Connectivity, Audio Return Channel, 3D support, and both 2K ( 3840x2160 ) and 4K ( 4096x2160 ) video resolutions. High Speed (or ' category 2' ) HDMI cables have been tested to perform at speeds of 340Mhz or up to 10.2Gbps, which is the highest bandwidth currently available over an HDMI cable and, can successfully handle 1080p signals including those at increased color depths and/or increased refresh rates from the source. These cables are backward compatible with previous versions of HDMI, and will work in all HDMI cabling scenarios.

3m RTS6900 Use with 3M Filters 2000 Series, 3M Filter 7093, P100, 3M Cartridges 6000 Series, or 3M Dual Airline Systems against a variety of gases, vapours and particulate hazards according to NIOSH approvals.

- Patch cord. - 10 . - Category 5E. - 4 UTP. - 24 AWG stranded. - Booted. - For high speed data applications. - Creates a high speed Cat5E circuit connection for cross and direct connects by patching cable runs to subsystems and equipment. - Exceeds Cat5E requirements. - Blue

Cisco Coaxial DS3 Cable, BNC Male to BNC Male, CAB-ATM-DS3/E3= Length: 20 Feet

Featuring zip cable construction and LC/SC connectors, this singlemode, 8.3/125 micron cable meets industry standards for fiber data transmissions, including most local area networks.

Cisco LC to SC Singlemode LX Fiber Patch Cable, CSS5-CABLX-LCSC , 10 Meters (32.80 ft) SC-LC Patch Cables for Ethernet 1000Base-LX connections Connector Details: SC to LC Cable Length: 10 Meters (32.80 ft) This cable works with the following models: Cisco Catalyst 2900 Series Cisco Catalyst 3560E Series Cisco Catalyst 3750 Series Cisco Catalyst 3750E Series Cisco Catalyst 3750 Metro Series Cisco Catalyst 4900 Series Cisco ME 2400 Series Cisco ME 3400 Series And possibly others...

• Supports up to 200 Mbps (Full duplex fast Ethernet) • Four Ethernet RJ-45 ports • Tri-level throughput indication

Today s advanced fast ethernet and gigabit computer networks require Enhanced Category 5 high-speed cabling to distribute data voice and video. Cables To Go s Enhanced Cat5 350Mhz Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! Constructed with high-quality cable and a shortened body plug this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Cables To Go 350Mhz Patch cables are available in a variety of colors to easily color-code your network installation. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair... Less

Get the performance you demand at a price that makes sense with multicolored 50/125 multimode fiber patch cords from Cables To Go. They provide higher bandwidth and transmission rates and support longer distances with lower loss than 62.5/125 fiber, but are still cost effective. Perfect for use with today's narrower aperture components, they are fully compatible with multimode applications. 50/125 multimode patch cords from Cables To Go are well-suited for protocols such as Ethernet, Fibre Channel, Infiniband, ATM, and Internet Protocol.

Belkin BLKA3L791100 Enjoy worry-free 10 and 100Base-T network connections with this premium patch cable. Uses 50-micron, gold-plated connectors to ensure clean, clear transmissions. Rigorous PowerSUM testing is designed to exceed Cat5e standard performance requirements. Cable Type: Cat5e Patch; Global Product Type: Cables; Connector/Port/In terface: Two RJ 45 Male; For Device Type: Network; Mac®; PC.PRODUCT DETAILS: -Cable Type: Cat5e Patch. -Jacket Color: Gray. - Connector/Port/In terface: Two RJ 45 Male. -OEM/Compatible: Compatible. -For Device Type: Network, Mac®, PC. -Global Product Type: Cables-Cat5e Patch. -Post-Consumer Recycled Content Percent : 0 %. -Compliance, Standards: CAT5E. -Cable Length : 100 ft. -Pre-Consumer Recycled Content Percent : 0 %. -Connects Devices (From/To):... Less

GE Security ADP/MM/ST/FC MM - Adapter, Male-Female, ST-FC

With Cables To Go s Cat6 550Mhz Snagless Patch Cables you can stay ahead of the game with the use of this high-speed cabling to distribute data voice and video. These cables will deliver stable performance to 550 MHz. Each comes UL verified and meets EIA/TIA Cat 6 TIA/EIA- 568-B-2.1 draft 9 standards. These cables will handle bandwidth intensive applications up to 550 Mhz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! Constructed with high-quality cable and a shortened body plug this design will keep Near-End Crosstalk (NEXT) levels to a minimum. The molded snag-free boot prevents unwanted cable snags during installation and provides strain-relief. Cables To Go Cat6 550Mhz Snagless Patch Cables are available in a... Less

Cisco Adapter Cable BNC Attachment (XBase2)/iRDA 15454EIABNCA24

Cisco T3/E3 Interface Coax Cable (BNC Male to BNC Male) - 25 Feet, CAB-T3/E3-25 Connectors: BNC Male to BNC Male Length: 25 Feet

Multimode Duplex Fiber Optic Cable(lc/st), Ul Types Ofnr/fddi, Fiber Count Duplex, Core Dimension 62.5/125 Micronm, Jacket Color Orange, Jacket Type Pvc, Construction Zipcord Fiber, Verified Yes, Standards Pfnr/fddi

This high-quality LC to LC Fiber Optic Patch Jumper Cable is designed to meet or exceed industry specifications. LC Fiber Patch Jumpers are perfect for Fast Ethernet, Fiber Channel, Infiniband, ATM and Gigabit Ethernet. The small LC connectors satisfy the need for higher port density both in the telecom room and the work area, and offer twice the port density of traditional SC and ST fiber connectors. Fiber patch cords are used to connect fiber optic equipment to fiber optic cross-connects, interconnects, and information outlets. The LC cable with latch clip design gives each connection greater durability in resisting pulls, strains and impacts during cabling installs and maintenance. Each cable is individually 100% optically inspected and tested for insertion loss and quality.

Today s advanced fast ethernet and gigabit computer networks require Enhanced Category 5 high-speed cabling to distrubute data voice and video. Cables To Go s Enhanced Cat5 350Mhz Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! Constructed with high-quality cable and a shortened body plug this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Cables To Go 350Mhz Patch cables are available in a variety of colors to easily color-code your network installation. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair... Less

NEC NP07ZL Zoom Lens for the NP4000 and NP4001

Cisco Smart Serial to V.35 Male DCE, 10', CAB-SS-V35MC For use with Cisco equipment, this cable typically connects a Cisco Smart Serial (SS) connector to a V.35 interface. Connections: Smart Serial V.35 Male DCE Length: 10 foot Warranty : 1 Year

The Belkin Multimode Fiber Optic Patch Cable meets the computer industry standard for data applications, including most local area networks. This cable is 5 meters long and features LC and SC connectors, two on each end.

Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Custom lengths are available - just give us a call at 800-506-9607. Features:A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm... Less

The Cat6 patch is perfect for use with 100Base-T or gigabit Ethernet Upgrade your network with a CAT6 Snagless Networking Cable from Belkin and enjoy clean, clear transmissions. Now you can replace CAT5 cables that don?t support 100Base-T or gigabit Ethernet and improve the return loss in your current network by 40 percent.||. Cable Type: Cat6 . Color: Black. Length: 14 ft. Maximize your network speed with higher bandwidth. Perfect for VoIP, video, and file transfers

Tripp Lite's 150-ft gray snagless category 5e (Cat5e) patch cable has 2 snagless RJ45 molded male connectors featuring integral strain relief. The cable is manufactured from PVC 4-pair Solid Conductor UTP for improved long run performance, and is rated for 350MHz/1Gbps communication.

Cisco T3/E3 Cable, 1.0/2.3 RF to BNC Male, 10', CAB-T3E3-RF-BNC-M

For voice/data/video distribution it will handle bandwidth- intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug this design minimizes Near-End Crosstalk (NEXT) levels.Connector 1: RJ45 MaleConnector 2: RJ45 MalePlease Note: Solid Cat5E patch cables offer increased performance for over Cat5 signal boosters.

Today s advanced fast ethernet and gigabit computer networks require Enhanced Category 5 high-speed cabling to distrubute data voice and video. Cables To Go s Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! Constructed with high-quality cable and a shortened body plug this design will keep Near-End Crosstalk (NEXT) levels to a minimum. The molded snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety... Less

Upgrade your network with a CAT6 Snagless Networking Cable from Belkin and enjoy clean clear transmissions. Now you can replace CAT5 cables that don t support 100Base-T or gigabit Ethernet and improve the return loss in your current network by 40 percent. Engineered with 50-micron gold-plated connectors to ensure clear transmissions and snagless molds to protect the RJ45 tab from damage during installation this Cable meets the performance requirements of Category 6. It is also backed by the Belkin Lifetime Warranty CAT6 SNAGLESS PATCH CABLE RJ45M/RJ45M; 100 WHITE

Tripp Lite's multimode duplex fibre channel LC/SC patch cable is manufactured from 50/125-micron zipcord fiber. The cable has SC connectors on one end and LC connectors on the other. It has a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in fiber and fibre channel applications. It is backward compatible with 62.5 micron fiber and built-in headroom for future applications. The cable provides higher bandwidth optimized for Gigabit and 10Gbps networks.