Digium 1AEX800F (0 FXS/0 FXO) PCI-e Card The AEX800 is a half-length PCI-Express 1.0-compliant, 8 port analog interface card. It supports combinations of station and/or trunk/line modules for a total of eight (8) interfaces. Like our PCI-based TDM800P, the AEX800 provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single card bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the AEX800 reduces part complexity, cable clutter, and points of failure. The AEX800 contains two module banks. Each bank supports up to four analog interfaces and may be filled either with one standard Digium quad station (S400M) or line/trunk (X400M) analog module, or up to two standard Digium single analog station (S110M) or line/trunk... Less

TM-IP5600 3.0 is a 56k Data/Fax soft Modem which is support to ITU T V.92. It adopted the technology of Motorola Modem and we optimize it based on the condition of China. This Modem can be used in the following Operating System: Windows98 Windows ME Windows NT Windows 2000 Windows XP and Linux. And you can operation this Modem by using Hyper Terminal. This Modem can prevent surge-damaged and it have get the authentication of China Compulsory Certification (3C) FCC and CE you can use it safely and stably. Data mode capabilities:. ITU T V.92 56Kbps. ITU T V.90 56Kbps. ITU T V.34 33600 to 2400 bps. ITU T V.32bis V.32. ITU T V.22bis V.22. ITU T V.23 V.21. FAX mode capabilities:. ITU T V.17 V.29 V.27ter and V.21 Ch 2. Group3 FAX. V.42 and NMP2-4 error correction (LAPM and MNP). V.42bis and MNP... Less

Digium TE205P 2-Port Digital PCI Card *5.0V* (PRI/T1/E1/J1) Digium TE205P Features Provides 2 RJ45 port for connecting T1/E1/J1 circuits Supports industry standard telephony and data protocols including PRI (North American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes Supports both E1, T1, J1 environments and is selectable on a per-card or per-port basis Improves I/O speed by up to 10 times resulting in reduced CPU usage and increased card density per server Can add option echo cancellation module ( VPMOCT064 - see option below) Fully compatible with existing software applications and is fully integrated with the Asterisk Open Source PBX/IVR platform Note: For use only with a 5.0V PCI slot (PCI 2.2 or higher compliant; see slots 1 and 3... Less

Digium TE205P Dual Span Digital PCI Card (T1/E1/J1) Features: Provides 2 RJ45 port for connecting T1/E1/J1 circuits Supports industry standard telephony and data protocols including PRI (North American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes Supports both E1, T1, J1 environments and is selectable on a per-card or per-port basis Improves I/O speed by up to 10 times resulting in reduced CPU usage and increased card density per server Fully compatible with existing software applications and is fully integrated with the Asterisk Open Source PBX/IVR platform Note: For use only with a 5.0V PCI slot [PCI 2.2 or higher compliant; see slots 1 and 3 below] One Year Warranty

Digium TE407P 4-Port Digital Echo Cancellation PCI Card *5.0V* (PRI/T1/E1/J1) Digium TE407P Features Provides 4 RJ45 ports for connecting T1/E1/J1 circuits Supports industry standard telephony and data protocols including PRI (North American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes Supports both line-side and trunk-side interfaces and advanced call features Supports both E1, T1, J1 environments and is selectable on a per-card or per-port basis Improves I/O speed by up to 10 times resulting in reduced CPU usage and increased card density per server Includes ( VPMOCT128 - see option below) Fully compatible with existing software applications and is fully integrated with the Asterisk Open Source PBX/IVR platform Half-length PCI Card Note:... Less

Digium Asterisk Appliance AA50 - Digium TCE400B VoIP Transcoding PCI-Express x1 card (1TCE400BLF) The TCE400B is a bundle of the half-length, low-profile PCI-Express x1 compliant TCE400P base card and the TC400M voice processing module. The TCE400B is designed to handle, in dedicated DSP resources, the complex codec translations for highly compressed audio as would otherwise be processed by Asterisk in software. The TCE400B decompresses G.729a (8.0kbit) or G.723.1 (5.3kbit/6.0kbit) into G.711 u-law or a-law; or compresses G.711 u-law or a-law into G.729a (8.0kbit) or G.723.1 (5.3kbit). The TCE400B is rated to handle up to 120 bi-directional G.729a transformations or 92 bi-directional G.723.1 transformations. The TCE400B does not require additional licensing fees for the use of these... Less

Digium TE122B Single Port Digital Echo Cancellation PCI Card (PRI/T1/E1/J1) Digium TE122B Features Provides one RJ45 port for connecting T1/E1/J1 circuits Supports industry standard telephony and data protocols including PRI (North American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes Supports both voice and data modes on a single span Supports both E1, T1, J1 environments Improves I/O speed by up to 10 times resulting in reduced CPU usage and increased card density per server Includes hardware echo cancellation module ( VPMOCT032 ) Fully compatible with existing software applications and is fully integrated with the Asterisk Open Source PBX/IVR platform Half-length digital PCI board Note: For use only with PCI Express (PCIe) 1.0 compliant... Less

Digium AEX808B (0 FXS/8 FXO) PCI-e Card The AEX800 is a half-length PCI-Express 1.0-compliant, 8 port analog interface card. It supports combinations of station and/or trunk/line modules for a total of eight (8) interfaces. Like our PCI-based TDM800P, the AEX800 provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single card bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the AEX800 reduces part complexity, cable clutter, and points of failure. The AEX800 contains two module banks. Each bank supports up to four analog interfaces and may be filled either with one standard Digium quad station (S400M) or line/trunk (X400M) analog module, or up to two standard Digium single analog station (S110M) or line/trunk... Less

Digium AEX820B (2 FXS/0 FXO) PCI-e Card The AEX800 is a half-length PCI-Express 1.0-compliant, 8 port analog interface card. It supports combinations of station and/or trunk/line modules for a total of eight (8) interfaces. Like our PCI-based TDM800P, the AEX800 provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single card bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the AEX800 reduces part complexity, cable clutter, and points of failure. The AEX800 contains two module banks. Each bank supports up to four analog interfaces and may be filled either with one standard Digium quad station (S400M) or line/trunk (X400M) analog module, or up to two standard Digium single analog station (S110M) or line/trunk... Less

Digium AEX822B (2 FXS/2 FXO) PCI-e Card The AEX800 is a half-length PCI-Express 1.0-compliant, 8 port analog interface card. It supports combinations of station and/or trunk/line modules for a total of eight (8) interfaces. Like our PCI-based TDM800P, the AEX800 provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single card bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the AEX800 reduces part complexity, cable clutter, and points of failure. The AEX800 contains two module banks. Each bank supports up to four analog interfaces and may be filled either with one standard Digium quad station (S400M) or line/trunk (X400M) analog module, or up to two standard Digium single analog station (S110M) or line/trunk... Less

Digium Asterisk Appliance AA50 - Digium TC400B VoIP Transcoding PCI 3.3/5.0v Card(1TC400BLF) The Digium TC400B VoIP Transcoding PCI 3.3/5.0v Card(1TC400BLF) is a bundle of the half-length, low-profile PCI-2.2 compliant TC400P base card and the TC400M voice processing module. The TC400B is designed to handle, in dedicated DSP resources, the complex codec translations for highly compressed audio as would otherwise be processed by Asterisk in software. The TC400B decompresses G.729a (8.0kbit) or G.723.1 (5.3kbit) into u-law or a-law; or, compresses u-law or a-law into G.729a (8.0kbit) or G.723.1 (5.3kbit). The TC400B is rated to handle up to 120 bi-directional G.729a transformations or 92 bi-directional G.723.1 transformations. The TC400B does not require additional licensing fees for the... Less

Digium TE210P 2-Port Digital PCI Card *3.3V* (PRI/T1/E1/J1) Digium TE210P Features Provides 2 RJ45 port for connecting T1/E1/J1 circuits Supports industry standard telephony and data protocols including PRI (North American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes Supports both E1, T1, J1 environments and is selectable on a per-card or per-port basis Improves I/O speed by up to 10 times resulting in reduced CPU usage and increased card density per server Can add option echo cancellation module ( VPMOCT064 - see option below) Fully compatible with existing software applications and is fully integrated with the Asterisk Open Source PBX/IVR platform Note: For use only with a 3.3V PCI slot (PCI 2.2 or higher compliant; see slot 2 below) Buy... Less

Digium AEX802B (0 FXS/2 FXO) PCI-e Card The AEX800 is a half-length PCI-Express 1.0-compliant, 8 port analog interface card. It supports combinations of station and/or trunk/line modules for a total of eight (8) interfaces. Like our PCI-based TDM800P, the AEX800 provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single card bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the AEX800 reduces part complexity, cable clutter, and points of failure. The AEX800 contains two module banks. Each bank supports up to four analog interfaces and may be filled either with one standard Digium quad station (S400M) or line/trunk (X400M) analog module, or up to two standard Digium single analog station (S110M) or line/trunk... Less

Digium AEX830B (3 FXS/0 FXO) PCI-e Card The AEX800 is a half-length PCI-Express 1.0-compliant, 8 port analog interface card. It supports combinations of station and/or trunk/line modules for a total of eight (8) interfaces. Like our PCI-based TDM800P, the AEX800 provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single card bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the AEX800 reduces part complexity, cable clutter, and points of failure. The AEX800 contains two module banks. Each bank supports up to four analog interfaces and may be filled either with one standard Digium quad station (S400M) or line/trunk (X400M) analog module, or up to two standard Digium single analog station (S110M) or line/trunk... Less

Digium TDM800P Analog PCI Card Digium TDM800P Features 8 RJ-11 ports for connecting analog telephones or POTS lines Half-length analog PCI board Provides two module banks that can support up to 4 total single FXO ( X100M ) and single FXS ( S110M ) modules or 2 total quad FXO ( X400M ) and quad FXS ( S400M ) modules Can add an optional hardware echo cancellation module ( VPMADT032 ) High Performance Echo Cancellation (HPEC) Software (optional) Note: For use only with a 3.3V or 5.0V PCI slot (PCI 2.2 or higher compliant; see slots 1, 2, and 3 below) Buy with Confidence. Your order also includes: New - Five Year Manufacturer Warranty (Digium) Like New - MetrolineDirect's Rock Solid One Year Warranty

Digium AEX8S4B (0 FXS/4 FXO) PCI-e Card The AEX800 is a half-length PCI-Express 1.0-compliant, 8 port analog interface card. It supports combinations of station and/or trunk/line modules for a total of eight (8) interfaces. Like our PCI-based TDM800P, the AEX800 provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single card bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the AEX800 reduces part complexity, cable clutter, and points of failure. The AEX800 contains two module banks. Each bank supports up to four analog interfaces and may be filled either with one standard Digium quad station (S400M) or line/trunk (X400M) analog module, or up to two standard Digium single analog station (S110M) or line/trunk... Less

Digium AEX840B (4 FXS/0 FXO) PCI-e Card The AEX800 is a half-length PCI-Express 1.0-compliant, 8 port analog interface card. It supports combinations of station and/or trunk/line modules for a total of eight (8) interfaces. Like our PCI-based TDM800P, the AEX800 provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single card bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the AEX800 reduces part complexity, cable clutter, and points of failure. The AEX800 contains two module banks. Each bank supports up to four analog interfaces and may be filled either with one standard Digium quad station (S400M) or line/trunk (X400M) analog module, or up to two standard Digium single analog station (S110M) or line/trunk... Less

Digium TE122P Single Span Digital PCI Card (PRI/T1/E1/J1)) Digium TE122P Features Provides one RJ45 port for connecting T1/E1/J1 circuits Supports industry standard telephony and data protocols including PRI (North American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes Supports both voice and data modes on a single span Supports both E1, T1, J1 environments Improves I/O speed by up to 10 times resulting in reduced CPU usage and increased card density per server Can add optional hardware echo cancellation module ( VPMADT032 ) (see option below) Fully compatible with existing software applications and is fully integrated with the Asterisk Open Source PBX/IVR platform Half-length digital PCI board Note: For use only with a 3.3V or 5.0V PCI slot... Less

Digium AEX850B (5 FXS/0 FXO) PCI-e Card The AEX800 is a half-length PCI-Express 1.0-compliant, 8 port analog interface card. It supports combinations of station and/or trunk/line modules for a total of eight (8) interfaces. Like our PCI-based TDM800P, the AEX800 provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single card bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the AEX800 reduces part complexity, cable clutter, and points of failure. The AEX800 contains two module banks. Each bank supports up to four analog interfaces and may be filled either with one standard Digium quad station (S400M) or line/trunk (X400M) analog module, or up to two standard Digium single analog station (S110M) or line/trunk... Less

Digium AEX841B (4 FXS/1 FXO) PCI-e Card The AEX800 is a half-length PCI-Express 1.0-compliant, 8 port analog interface card. It supports combinations of station and/or trunk/line modules for a total of eight (8) interfaces. Like our PCI-based TDM800P, the AEX800 provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single card bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the AEX800 reduces part complexity, cable clutter, and points of failure. The AEX800 contains two module banks. Each bank supports up to four analog interfaces and may be filled either with one standard Digium quad station (S400M) or line/trunk (X400M) analog module, or up to two standard Digium single analog station (S110M) or line/trunk... Less

Digium AEX801B (0 FXS/1 FXO) PCI-e Card The AEX800 is a half-length PCI-Express 1.0-compliant, 8 port analog interface card. It supports combinations of station and/or trunk/line modules for a total of eight (8) interfaces. Like our PCI-based TDM800P, the AEX800 provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single card bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the AEX800 reduces part complexity, cable clutter, and points of failure. The AEX800 contains two module banks. Each bank supports up to four analog interfaces and may be filled either with one standard Digium quad station (S400M) or line/trunk (X400M) analog module, or up to two standard Digium single analog station (S110M) or line/trunk... Less

New Page 1 Digium TDM2406E 24 Port Modular Analog PCI 3.3/5.0V Card with 24 Trunk Interfaces and HW Echo Cancellation (1TDM2406EF) The Wildcard TDM2400P is a full-length PCI 2.2-compliant card for connecting analog telephones and analog POTS lines through a PC. It supports a combination of up to 6 FXS and/or FXO modules for a total of 24 lines. Using Digium's Asterisk Open Source PBX software and standard PC hardware, one can create a telephony environment that includes all the sophisticated features of a high-end business telephone system. Using an industry- standard bursting, bus-mastering PCI interface chip that is found within millions of PC systems worldwide, and Digium VoiceBus™ technology, the TDM2400P eliminates the requirement for separate channel bank and T1 interface cards, at... Less

Digium TE410P 4-Port Digital PCI Card *3.3V* (PRI/T1/E1/J1) Digium TE410P Features Provides 4 RJ45 ports for connecting T1/E1/J1 circuits Supports industry standard telephony and data protocols including PRI (North American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes Supports both line-side and trunk-side interfaces and advanced call features Supports both E1, T1, J1 environments and is selectable on a per-card or per-port basis Improves I/O speed by up to 10 times resulting in reduced CPU usage and increased card density per server Can add option echo cancellation module ( VPMOCT128 - see option below) Fully compatible with existing software applications and is fully integrated with the Asterisk Open Source PBX/IVR platform Half-length PCI... Less

Digium TE220 Dual Span Digital PCI Express Card (T1/E1/J1) Features: Provides 2 RJ45 port for connecting T1/E1/J1 circuits Supports industry standard telephony and data protocols including PRI (North American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes Supports both E1, T1, J1 environments and is selectable on a per-card or per-port basis Improves I/O speed by up to 10 times resulting in reduced CPU usage and increased card density per server Fully compatible with existing software applications and is fully integrated with the Asterisk Open Source PBX/IVR platform Note: For use only with PCI Express (PCIe) 1.0 compliant slot - x1, x4, x8, or x16 [x1 shown in slot 4 below] One Year Warranty

Digium AEX813B (1 FXS/3 FXO) PCI-e Card The AEX800 is a half-length PCI-Express 1.0-compliant, 8 port analog interface card. It supports combinations of station and/or trunk/line modules for a total of eight (8) interfaces. Like our PCI-based TDM800P, the AEX800 provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single card bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the AEX800 reduces part complexity, cable clutter, and points of failure. The AEX800 contains two module banks. Each bank supports up to four analog interfaces and may be filled either with one standard Digium quad station (S400M) or line/trunk (X400M) analog module, or up to two standard Digium single analog station (S110M) or line/trunk... Less

Digium AEX821B (2 FXS/1 FXO) PCI-e Card The AEX800 is a half-length PCI-Express 1.0-compliant, 8 port analog interface card. It supports combinations of station and/or trunk/line modules for a total of eight (8) interfaces. Like our PCI-based TDM800P, the AEX800 provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single card bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the AEX800 reduces part complexity, cable clutter, and points of failure. The AEX800 contains two module banks. Each bank supports up to four analog interfaces and may be filled either with one standard Digium quad station (S400M) or line/trunk (X400M) analog module, or up to two standard Digium single analog station (S110M) or line/trunk... Less

Digium Asterisk Appliance AA50 - Digium TE420 4 Span Digital T1/E1/J1/PRI PCI-Express Card and Hardware Cancellation (1TE420BF) Digium's TE420 PCI Express card provides termination of up to 120 channels of voice or data across four E1, T1, or J1 interfaces in a PCIe x1 form factor. Selectable on a per-port or per-card basis, the TE420 allows E1 and T1 circuits to be mixed with full channel synchronization. Supporting PCIe x1, the TE420 may be used in any available PCIe 1.0 compliant slot - x1, x4, x8, and x16 without considerations for voltage selection or lane size. The TE420 may be combined with Digium's VPMOCT128 Octasic DSP-based echo cancellation module (not shown in picture). The VPMOCT128 provides the G.168 algorithm which has been labeled a benchmark for echo cancellation and... Less

Digium AEX803B (0 FXS/3 FXO) PCI-e Card The AEX800 is a half-length PCI-Express 1.0-compliant, 8 port analog interface card. It supports combinations of station and/or trunk/line modules for a total of eight (8) interfaces. Like our PCI-based TDM800P, the AEX800 provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single card bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the AEX800 reduces part complexity, cable clutter, and points of failure. The AEX800 contains two module banks. Each bank supports up to four analog interfaces and may be filled either with one standard Digium quad station (S400M) or line/trunk (X400M) analog module, or up to two standard Digium single analog station (S110M) or line/trunk... Less

Digium AEX860B (6 FXS/0 FXO) PCI-e Card The AEX800 is a half-length PCI-Express 1.0-compliant, 8 port analog interface card. It supports combinations of station and/or trunk/line modules for a total of eight (8) interfaces. Like our PCI-based TDM800P, the AEX800 provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single card bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the AEX800 reduces part complexity, cable clutter, and points of failure. The AEX800 contains two module banks. Each bank supports up to four analog interfaces and may be filled either with one standard Digium quad station (S400M) or line/trunk (X400M) analog module, or up to two standard Digium single analog station (S110M) or line/trunk... Less

Digium AEX805B (0 FXS/5 FXO) PCI-e Card The AEX800 is a half-length PCI-Express 1.0-compliant, 8 port analog interface card. It supports combinations of station and/or trunk/line modules for a total of eight (8) interfaces. Like our PCI-based TDM800P, the AEX800 provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single card bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the AEX800 reduces part complexity, cable clutter, and points of failure. The AEX800 contains two module banks. Each bank supports up to four analog interfaces and may be filled either with one standard Digium quad station (S400M) or line/trunk (X400M) analog module, or up to two standard Digium single analog station (S110M) or line/trunk... Less