Type: Standard ATX Design Maximum Power: 500W Fans: 1 Dimension: 5.9"(W)x3.4"(H)x5. 5"(D) Main Connector: 20/24-pin x1 (20pin convertible), ATX 12V 4 pin X 1, SATA X 4, Molex 4 pin X 4, Floppy X 1 *Above are all the connectors included in this power supply. your system may not need them all. it is fine to leave unused connectors unplugged. Hold-up Time: 16ms minimum with full load 115 VAC/60 HZ Efficiency: > 70% Over Voltage Protection Over-current protection Over-voltage protection Short circuit protection on all outputs Input Voltage: 100-120 vac / 200-240 vac Input Frequency Range: 50 / 60hz Output: 500 Watt +3.3V 38A, +5V 24A, +12V 22A, -12V 0.8A, +5VSB 2A MTBF: >100,000 Hours (11 years & 2 months) * Excludes the life of the fan Approvals: CE, CB, FCC, CSA **Fan color may very from... Less

Simplifies installations that do not require a conduit, Class 2 outputs standard and may be wired directly to 115VAC input Provides continuous regulated and filtered 12VDC or 24VDC (80-800) Designed specifically to support electric locks and access control systems Provides individual fused protection, field reset On/Off switch allows for easy service and inspection Fire alarm input provides release of fail-safe locks in case of emergency Field selectable outputs Auto-resetting circuit protection Battery charging circuit, PTC protection LED system status indicator Class 2 outputs Heavy gauge enclosure, 18 ga Low battery disconnect when batteries are below 70% capacity Painted Beige Finish

Power Supply, Output Volts 16 V Dc, Output Current 60 A Amps, Current Limits 0-100, Line Volts Regulation 20 Mv, Load Regulation Greater Than Or Equal To 50 Mv, Line Regulation 20 Mv, Meter Type 2 Digital, Input Voltage 120vac, Input Frequency 60 Hz Hz, Connection Parallel Or Series, Display 3-digit Led Display, Ripple Volts Regulation 5 Mvrms